Cranes, Krananlagen: Crane Systems by J.D. Neuhaus - Cranes & Kits

JDN Cranes & Kits

Explosion-protected JDN Crane Systems are the right choice for the most challenging environmental conditions, whether onshore or offshore.

Explosion Protection

Classification: Ex II 2 GD IIA T4(X) / II 3 GD IIB T4(X)
Higher Classifications on request

Cranes

JDN Cranes

The delivery programme comprises explosion-proof

  • overhead travelling cranes
  • suspension cranes as well as
  • slewing cranes

which can be adapted to your individual demands as complete special installations are our speciality.

According to necessities JDN hoists in motor trolleys or monorail systems are integrated in the crane installation. A comfortable and user-friendly pneumatic speed control is also available as for example the standard two speed control for crane and trolley drive.

An infinitely variable speed control of the trolley and the hoist is also possible.

Different JDN Cranes in Detail

  • overhead travelling crane with one or two main girders
  • suspension crane also with minimised headroom - with special low headroom trolleys
  • slewing crane
  • crane with mechanically coupled synchronised hoists
  • crane with parallel hoists
  • carrying capacities up to 100 t
  • with spans up to 36 m

Higher carrying capacities and spans on request.

JDN Crane Kits for explosion-proof air cranes  

Carrying capacities: up to 10 t

With these crane kits overhead travelling cranes up to 10 t capacity can be built very simply and economically especially for applications in hazardous areas. The crane manufacturer provides the main girder and JDN delivers all the components that are necessary to built an air powered crane in various packages:

  • end carriages with pneumatic drives
  • energy feeding systems
  • safety accessories
  • and of course the appropriate air hoist with trolley.

The following examples illustrate two tailor-made solutions:

Telescopic crane with transfer to a suspension crane

A spark proof suspension crane equipped with a telescopic beam has transfer points to three neighbouring crane installations. With extended telescope the load can be handed over to the corresponding transfer zone in one of three adjacent halls where again bridge cranes are operating. Wrong operation can be recognised and the corresponding crane movements can be automatically stopped in time.

Suspension crane with traverse trolley

In this case the crane trolley must regularly transfer from the stationary branch line to the crane bridge exactly positioned in front of the branch line. After realised crane travelling the load can be delivered at different points. In this installation a semi-automatic positioning device was introduced: When near the transfer point the command for positioning is given the crane bridge automatically goes into right position. The crane bridge and the crane trolley can only move if the correct system status is released. Because of the extremely reduced space an Ultra Low Trolley was chosen.

JDN Cranes

Load capacity Main travel (crane) Cross travel (trolley) Hoist
max. speed control max. speed control max. speed control
[m/min] 2-steps [m/min] 2-steps variable [m/min]
lifting / lowering
1-step variable
1 t 7/20 x 9/14 x   5 / 12 x +
2 t 7/20 x 9/14 x   2,5 / 6 x +
3 t 7/20 x 9/14 x   3,5 / 8,5 x +
6 t 7/20 x 9/14 x   1,5 / 3,5 x +
10 t 7/20 x 5/12 x   1,0 / 3,0 x +
15 t 5/25 x 5/12 x + 0,7 / 1,5 x +
20 t 5/25 x 5/12 x + 0,5 / 1,3 x +
32 t 5/25 x 5/12 x + 0,6 / 1,3 x  
40 t 5/25 x 5/12 x + 0,65 / 1,2 x  
50 t 5/25 x 5/12 x + 0,50 / 1,1 x  

x=Standard
+=Option
(speeds under standard conditions)

other maximum loads on demand

Issue: 14.04.2013

This website uses cookies

Cookies help us provide our services to you. By using our services, you are consenting to our use of cookies.